Choose construction and fibre by zone, not by a single unit price
A hotel corridor, a guestroom, a food-and-beverage floor and a workplace should each have their own construction and fibre, chosen for how that zone is used. A single inexpensive specification should not be rolled out across the whole building because the unit price looks convenient.

A zone table you can attach after the brief
A hotel corridor, a guestroom, a food-and-beverage floor and a workplace should each have their own construction and fibre, chosen for how that zone is used. A single inexpensive specification should not be rolled out across the whole building because the unit price looks convenient.
This page is a decision table to attach after the hotel and workplace carpet specification brief. It uses only the material and construction families already published on this English site. It does not replace the brief, and it does not set a price.
| Zone | Typical wear or soiling | Construction or fibre logic already published on this site | What must be confirmed in writing |
|---|---|---|---|
| Corridors and other circulation floors | Continuous walking, wheeled luggage or trolleys, and soil carried in from adjacent floors. The cleaning equipment already in the building usually matters as much as appearance. | Name a fibre and a construction for this duty from the families already published on this English site: wool, wool loop, felted wool, viscose, lyocell, Tencel, cotton, jute, sisal, seagrass, polypropylene, and outdoor-oriented weaves, with finishes such as relief carving, cut pile or high-low cut-loop where the brief actually calls for them. Do not extend a quieter guestroom specification into the corridor only because the unit price is lower. | The fibre and construction of the item actually offered; item-specific performance evidence; how colour will be controlled across dye lots; roll width and seam direction on the drawing. Nylon and Axminster are not listed families on this English site — if a project standard names them, the actual fibre and construction must be confirmed in writing. |
| Guestrooms | Lower traffic than a corridor, but concentrated wear at the bed, desk and entrance, and a closer view of colour and texture. | Fibre should still be named for this zone, not copied from the corridor because two samples look similar in a photograph. Published records include wool, viscose, lyocell or Tencel and carved or cut-pile finishes on individual designs. A lounge or guestroom photograph on this site illustrates a setting; it does not transfer that construction into the brief. | Fibre, construction, pile, backing and edge for the rooms in question; care and cleaning for that specification; whether a photograph or artwork is a product record or only a design direction. Catalogue reference sizes are not stock. |
| Food and beverage | Spills, frequent cleaning, and transitions to hard floors at service routes and entries. | The brief, as already requested on this site, should say how the space will be maintained and who will do it, then name a fibre and construction from the published families that can be discussed against that routine. Do not assume a decorative viscose, a carved finish or an outdoor-oriented weave is suitable for a dining floor without that written discussion. | Fibre, construction, backing, the cleaning method, and item-specific performance evidence. Suitability for this zone must be confirmed in writing / at quotation; this site does not publish a standard F&B specification. |
| Workplaces | Repeated chair movement, soil from entrances, and an appearance the operator expects to keep under a building cleaning programme. | As with a corridor, soiling, cleaning equipment and the required appearance should drive the fibre and construction, chosen from the published families and written zone by zone. A single inexpensive product specified for every plate of the building is not a workplace brief. | Fibre, construction, backing, item-specific performance evidence, and dye-lot control across more than one area or floor. If a workplace standard names nylon or another fibre not listed as a family here, confirm the fibre of the actual item in writing. |
What the published families do and do not cover
ADA FLOOR describes this English-language offer as a full-category range for hospitality, residence and workplace. Design records and the woven collection already name fibres such as wool, wool loop, felted wool, viscose, lyocell, Tencel, cotton, jute, sisal, seagrass and polypropylene, together with outdoor-oriented weaves. Individual designs also record finishes such as relief carving, cut pile and high-low cut-loop. Those names stay attached to the individual product, because similar colours can conceal very different compositions.
This English catalogue does not list nylon or Axminster as collection families. If a project standard requires either one, put that requirement in the brief and ask the mill to confirm, in writing, the fibre and construction of the item actually offered. Do not treat a photograph, an artwork reference or a unit price as evidence that those constructions are in the range.
The site does not publish a standard dye-lot procedure, a standard roll width, or a lead time. Colour control, seam direction and delivery arrangements are project decisions and must be confirmed in writing / at quotation. Catalogue reference sizes are starting figures, not stock. Performance evidence is item-specific; the catalogue is not treated as carrying any one rating.
How to read a room photograph
This site publishes hospitality and residential room references that show how different settings read — a circulation floor at DoubleTree by Hilton Wuxi, a lounge and guestroom at Hilton Garden Inn Hengqin, a continuous lounge field at Fairmont Peace Hotel. A photograph illustrates a setting and a carpet relationship. It does not, by itself, settle construction, performance or the scope of a contract.
What remains outside this page
This page is a zone-by-zone construction decision for fixed or project carpet. It is not a furniture-layout size guide for a movable area rug, and it is not a tutorial in how to recognise a handmade piece. Readers choosing a loose rug around a sofa and table should use the movable-rug size and placement note on adarug.com. Readers preparing a Chinese bid document should use the Chinese ADA FLOOR brief at adafloor.net/zh-cn/knowledge/hotel-carpet-bid-brief/.
How to send the table to ADA
Keep this table with the mill-ready brief, the specification guide, the room drawing and the sample. The earlier, shorter note From a reference image to a considered carpet brief can stay in the set as a secondary reference; this zone table and the hotel-and-workplace brief are the pages to send with an RFQ.
When sampling, dye lots, roll width and seam direction must be controlled across more than one building, attach the multi-building dye-lot and seam table with this zone table and the mill-ready brief.
Email the studio at adafloor@163.com, or call +86 158 1876 6066. ADA FLOOR is a carpet design and manufacturing studio with showrooms in Shenzhen and Shanghai and a hand-tufting workshop in Xiqiao, Foshan. Visits are by appointment. Inquiries from Europe, the Middle East and Southeast Asia are received through the same desk.
Send a room plan, the intended use of each zone, approximate quantities, design references, the delivery country, and the performance documentation the project team requires. Mark the decisions already made and the questions that still need to be confirmed in writing.
Bring the plan, the zone list and the documents you need returned to the conversation.
Discuss a carpet project with ADA ↗